Three Automotive Services Every Car Needs

Automotive Services photoTaking care of your car could take up a lot of time. Car fanatics could argue that its all part of the pleasure in owning a car. On the other hand, other will say its something that needs to be done just to keep the car running. The bottom line is both car owners are delighted with the idea of an auto service garage that offers all the automotive services a vehicle needs.

A master mechanic knows just what a car needs and at the same time has the automotive services to fulfill it. In other words, a good auto service garage doesnt cater to a specific kind of vehicle. The more automotive services it can offer the better. That means customers dont have to hop from one garage to the other. At the same time, the mechanics can completely own up to what they have started with.

Several automotive services any car repair shop should have are the following:

Tune Ups

Cars need maintenance services. That means the engine needs to be checked on regular intervals to make sure that it is in perfect condition. Advancements in tune up services are ideal because vehicles are also affected by technological developments. If your car is one of the newest models, a proper tune up involves a diagnostic scanning of your its onboard computer systems. This could be one of the most costly automotive services your car can experience. But if your car is the expensive type, its just logical to give it the treatment it needs including skills from the expert mechanic.

Transmission

Another of those most common automotive services your car needs is transmission. Most cars nowadays use fuel injections which could be really complicated for the unskilled mechanic. Transmission replaces about 25% of the contaminated fluid, leaving behind 75% of the old fluid to mix with the new. This sounds simple, but the latest technology is required to make it right.

Timing belts replacement

Car owners should know that timing belts should not remain permanent on a car. In the past, chains were used instead of belts but that produced too much noise so the belts were introduced. Belts are not really costly, but it takes experience to be able to replace them correctly. If you do not avail of this specific service, your engine could get seriously damaged.

A K&n Filter Is A Lot More Than Merely A Substitute Automotive Body Component

K&N is among the very highly recommended parts producers. Their slogan is: K&N – The Worlds Best Airfilter. When we focus on the major scientific studies that K&N do to improve the flow through filters so that it not just allows through the airflow, practically without hindrance, but that it will boost the effectiveness of the engine off and on the race track. K&N has originated the high flow performance air filter and are generally relentlessly doing research in boosting the products so that it can help to make a major difference through the general capabilities of your motor. They will look at filters like a scientific research and get regular ingenious upgrades crafted to their filters.

These people furthermore have really ingenious and yet uncomplicated improvements made to their own oil filters that anybody that were required to change an oil filter will truly appreciate. As an example they now have a welded screw at the top of the oil filter to enable you to screw the oil filter onto or remove it from the engine with a simple spanner. So simple, so effective!

They have got a vitally important reassurance to owners that proves that Auto producers is not able to threaten anyone that warranties will end up as void, should they decide to use some other oil filtersin comparison to the genuine car brand make. Might you utilize high quality parts which include K&N Filters the warranty is still upheld fully. This really is explained in the Federal Consumer Products Warranties Law. This Law is also called the Magnusson-Moss Warranty Act.

A K&N oil filter has rapidly end up being the preferred Oil filters purely because of the container toughness and robustness. These canister model oil filters are designed to tolerate higher oil pressures than standard oil filters. The item is furthermore constructed that will really perform well using the latest synthetic motor oils. K&N is doing in depth scientific tests in order to make high-quality Oil filters available.

The particular K&N Intake is a high-flow air intake system which was made that will produce a difference in power output of the engine. They build the K&N Intake systems primarily with a view to generate air-flow in such a manner that this would certainly raise the horsepower of the engine significantly.

K&N Filters never merely manufacture the traditional, run-of-the-mill replacement auto body part however the top in the planet try and compete with them on quality. K&N stand 100% behind their goods and own a world first in a Million mile Warranty provided with to their own products.

Probably the most convenient method to select and get any K&N part is on-line at http://www.autopartsnetwork.com.

What Is The Best Automotive Advertising Method

The automotive industry is one of the most lucrative ventures today. This holds true most specially with the auto repair shop business now that the economy is in a recession. People are holding off their plans to upgrade their old vehicles with new ones, and instead opt to have these old cars repaired. And with this demand on a rise, auto repair shops have no way but up in terms of profitability. However, competition is getting tougher as more and more shops are being opened on a daily basis only to tap the growing market. How can you make sure that your auto repair shop remains on top of the game?

The answer to this need will be to provide your shop the right advertising scheme that will drive in sales ultimately. With so many kinds of advertising medium, which one is clearly the most effective for an auto shop business? Direct mail advertising is the best marketing scheme for automotive industry. It is cost-efficient and targets the right customers for your shop. With these factors, any auto repair shop owners must understand that in order to compete for more customers will be to let these car owners know of your business and the services you offer through a direct mail.

Shop owners must not consider direct mail as an expense but rather an avenue for profits. The only way to achieve this goal of achieving more revenue will be to create the most effective direct mail. And the best way to accomplish having an effective direct mail will be to hire the right people to do the job. Automotive advertising experts will help you create the most effective direct mail and at the same time, efficiently deliver these mails to the right market. It is not just about giving away mails; it is about giving the right mail to the right prospects. With the help of a reliable automotive advertising company, you will not only give out the best direct mails, but these mails will result to more sales.

Automotive Repair Shop Software Review – For Repair Shop Owners

Automotive repair shop software is a tool that is designed to reduce to the barest minimum of time you spend on administrative activities, so that you can actually concentrate on the job, improve business work flow and make more profits.

Advanced technology and knowledge has moved car shop management activities and control to a higher level where you can handle much more jobs, work faster, and net more profits.

You can actually move your shop from the traditional time wasting method of filing carbon copy forms, and doing everything manually to tracking all activities electronically.

Good automotive repair shop software will handle all your jobs from the beginning to the end, thus making your shop administration far less boring.

The following are the features that make this software indispensable for every car repair centers that want to really jerk up their productivity.

1. Appointment Scheduling: You can easily plan your appointments with customers ahead of the time, and get information about when customers are due to arrive for their jobs and the time you allow for them.

2. Track Work in Progress: With a simple color code you can track the status of each job and know how they are progressing.

3. Check Your Level of Profitability: You can easily determine when you are making profit or otherwise with the right color code.

4. Car Parts Sales: You can sell auto parts over the counters without the input of the full details of customers, a great time and money saver.

In the situation where you have a lot of customers to deal with, automotive repair shop software will show you who you sell what to, and all the details associated with it.

You can also get all the information you need about customers’ histories, that will help you to quickly confirm and determine important issues like refund, recalls, etc.

5. Parts Management: The software can take care of issues like inventory control, price matrix, restock invoice tracking, etc, which will help you to have total control over parts movement and prices, and minimize losses altogether.

6. Marketing Management: A great marketing tool that will help you do follow up on customers by giving you information on them and helping you to send reminders, thank you cards, appointment scheduling time, etc.

Automotive repair shop software makes all your workshop activities a breeze. It turns every complexity into a simple process that will make your job less burdensome and more profitable.

Automotive and Transportation Email Marketing Strategy

You have recently opened a limousine hire service targeted towards tourists and others who are looking to enjoy a luxurious chauffer driven ride on a special occasion. Your biggest problem is that business spikes at certain times during the year (college graduations, wedding seasons, etc) and experiences a lull the rest of the year.

This strategy will help you stabilize your business all year round and keep the cash coming in even during times of traditional slowdown.

Who is your customer?

Be it a college graduation, prom night, wedding day, or tourists day out, your customer is typically a luxury seeker. He or she prefers to drive around in style, but can only afford to do so on special occasions. To work around this, you need to focus on customers who can afford limousine rentals on an everyday basis. Hence your target profile should be large corporate companies who have their head offices located in the vicinity of your service. This way you would be able to ensure business all year round by becoming the preferred vendor for the companys board of directors and other staff entitled to luxury cars.

What is the best thing you can do for that customer?

Corporate offices expect the very best in terms of service from their vendors and are willing to pay a little extra to get it. Offer dedicated cars and chauffeurs to each corporate that signs an annual contract. Offer value added benefits to retain such customers by guaranteeing them additional cars within a one hour notice period and so on.

How are you going to do it?

Ensure you have a sufficiently large fleet of new limousines as well as professional chauffeurs. If required, you could enter a sub-contract with other limousine hire services located around you to make up for excess demand. Create a database of all the offices within a predetermined radius of your rental office.

Invite them, via email, to join your Privilege Club of customers who are entitled to special benefits when they signed up for half-yearly or annual contracts. Incentivize such deals not only with discounted pricing but more through value added services such as dedicated cars and chauffeurs.

Dont forget to say thank you

Every new member of the Privilege Club gets a thank you email and a gift hamper. Also include a link to a survey with the following suggested questions and others of your own.

What is your companys daily requirement of luxury cars?

Is this a fixed or flexible requirement? Are there any times of the year when the can foretell a spike in requirement? What are the key factors that decide their choice of a car vendor service, pricing, availability, newness of fleet, etc?

When to communicate with your members

In order to maintain ties, send out email newsletters on monthly or quarterly basis. Use the newsletter to inform them of any special offers for employees and one time hires as well as of upgrades to your fleet or service.

Of course you must also contact them one month prior to the expiry of their contract urging them to renew it. If you do not hear from them, send a follow up email one and two weeks after your initial mail.

How do you measure success?

Conduct quarterly surveys of your existing customer database to judge their level of satisfaction across various service and pricing parameters.

Build Build Build. Measure new as well as lapsed corporate partners on a monthly basis and compare numbers and turnover with like periods across the past few years. The more people that sign up for annual Privilege Club memberships, the more stable your business will become!

How to Avoid Automotive Repair Fraud

Too many automotive centers are taking advantage of the consumer’s lack of knowledge about their vehicles when it comes time for repairs. While there are many trustworthy shops that do honorable and reliable work, there are always places that are quick to take the consumer’s money while not making the necessary repairs.

The government, the press, Better Business Bureaus and other consumer rights advocates are working hard to intervene, and while some shops are getting caught and being indicted with fraud, too many are still under the radar and getting away with it.

Here are some tips on how to become better educated about your vehicle so that when repair work is needed, you will have a better understanding of what is actually being done.

Talk to Everyone

The most important thing of course is to find a reputable place thats been in business for several years. The best way to find this kind of information is to ask your family and friends where they have their vehicles maintained. Ask your coworkers and anyone whose opinion you value. Why do they like the shop they frequent, what their fees are, and how long they have been using that particular place? This is where doing a little research will save you a ton of headaches and a lot of money.

When its time to take your vehicle to the shop, be very specific in what you are there for. For example, if you are replacing tires, let them know you are there just for tire work. If the service adviser tells you that you need additional work done, question why it’s needed. If you feel the mechanic is trying to up sell you unnecessary repair work, this should raise a red flag. You have every right to request a quote for their suggested repairs and get a second opinion.

Don’t be Shy

There are times when a service adviser may tell you that you need new brakes or that you have a leak, both of which can be relatively easily spotted when the vehicle is in the air and the wheels are off the vehicle. This is generally the time these types of potential problems are found. Ask the adviser for measurements of components that are worn, such as the brakes, and ask if you can take a look for yourself. If you feel they are not being forthcoming with the information you need in order to make a decision, or they will not allow you to view the problem, do not approve the repair. Most reputable shops have no problem with these kinds of requests.

If you need major repairs, such as engine replacement or transmission repairs, always get a second opinion from another reputable shop. If you have built up a good relationship with your existing shop, this may not be necessary. But if this is the first time you have brought your vehicle to a new shop it’s important to get that second opinion.

If it’s not practical to move your vehicle, take the time to get “ballpark” estimates by telephone. Reputable shops understand the need for their customers to get additional quotes. Its in their best interest to accommodate you in any way they can in order to get and keep your business.

Be Prepared

Be a knowledgeable consumer. Read your owners manual and be prepared for the regular wear and replacement work that will arise every few thousand miles. Keep your vehicle on its proper maintenance schedule and when larger problems arise, you are not hit unawares with a huge expense.

It costs money to own a vehicle and keep it in good repair, and it can cost more than you bargained for if you are not careful. Don’t be afraid to ask for input from others and gather as much information along the way as you can. Being prepared, you stand a much better chance of avoiding automotive repair fraud.

Automotive Technology-how Could We Understand The Automatic Diagnosis System

Nowadays, the OBD system and the OBD Scanner have been received by many car owners. It is because its important functions which are the monitoring system for the waste gas from the car and on the other hand, the OBDMORE OBD Scanner also has another function which is about the diagnostic for the mechanical trouble of the car. The word OBD is the abbreviation of the word group which is On-Board Diagnostics. We could also understand the function of the OBD like that it is the car auto diagnostic system. Today, the obdmore.com, which is the professional exporter and manufacturer of high quality Auto maintenance products at reasonable price and best service, will tell you the detail information about the OBD. The main products of this company include the AUTOCOM CDP, X431, LAUNCH CREADER, BMW ICOM, VAS 5054A and MAXIDAS DS708.

From the information on the website http://www.obdmore.com/ , we could find some value text about the diagnostic function of OBD for the system trouble of car. When the system has been fails, the fault lamp which name is MIL or the checking engine warning light will starting lighting, at the same time, the power control module which name is PCM would store the fault information in the memory module. Through the OBDMORE OBD Scanner and certain procedures, the fault codes can be read out from the PCM. According to the tips of the fault codes, the maintenance employee can quickly and accurately determine the reason and the location of the fault. As we all know, the famous brand car has their own OBD system such as the MAXIDAS DS708, MB STAR and FORD IDS. These equipments will make the trouble of your car become easily handling.

From other information, we have also known about the original of the OBD system. From the 1980s, the major car manufacturers from United States, Japan, Europe and other developed countries has been in the production of the car which equipped with OBD. The initial OBD did not have the self-test function. The OBD-II which was more advanced than the OBD was produced in the mid-1990s. The American Society Automotive Engineers which name is SAE has developed a set of standards for OBD. The standards for the vehicle automatic diagnosis system were related to the stringent emissions controlling.

We could know that the initial OBD was based on the function for the emission controlling. When the amount of vehicle emissions which are carbon monoxide, hydrocarbons, nitrogen oxides or fuel evaporative emission has exceeded the standards set, the fault light of the OBD system will light up alarm. From the function and the creation history for the OBD, we should know more about the OBD system and the obdmore.com. If you want to know more about this meaningful information, you could search the website of obdmore.com and they will give you the satisfactory answers.

Lean Manufacturing Implementation – From The Automotive To The Pharmaceutical Industry

Toyota is generally credited with developing the basic principles of lean manufacturing and formulating the strategies for this implementation. But these production techniques actually go back even further-to Henry Ford and beyond. In developing his assembly-line flow, Ford pursued continuous quality improvement and the elimination of waste. Lean manufacturing is, therefore, associated in many minds mainly with the automotive industry.

That entrenched association has sometimes been at the root of the pharmaceutical industry’s slow adoption and halting, incomplete application of lean manufacturing solutions. The overall lack of success in this implementation in this industry can also be attributed to the fact that in automotive manufacturing all the pieces of the production process are contiguous and proceed in an obvious end-to-end flow. There is an integrated system in which activities flow. But that’s manifestly not the case in pharmaceutical manufacturing.

Our industry tends to be divided up into discrete silos of operation. For example, R&D has its peculiar function, engineering has its own purview, and so does QA-with each generally doing a good job within the given area of operation, but usually not overly concerned with how it affects other departments. This runs counter to the idea of product flow and fails to consider customer needs.

Also, when lean manufacturing consultants come in using alien Japanese words and lean jargon, framing everything in terms of a different industry, there’s often a reluctance to fully embrace the new system. So, an unaltered application of an automotive version of lean manufacturing seldom has the desired results.

Further, the failure, primarily on the part of consultants, to fully understand and adjust for industry-specific issues has also been an impediment to a thoroughgoing and successful implementation. The pharmaceutical industry is vastly different from the auto industry, especially with respect to the many unit operations and the complicated requirements of regulatory compliance. FDA regulations have typically-until fairly recent developments like PAT initiatives intended to support innovation and efficiency-contravened the goals of lean manufacturing.

Lean manufacturing implementation is built on action-reducing waste, improving efficiency, and delivering value to the customer. But in the drug industry, any change slows down the process much more than in other industries. Regulatory compliance burdens and mandates imposed by the FDA require extensive validation and proof that the system changes won’t compromise quality. This means that when a pharmaceutical company determines exactly how to effect lean improvements, it may actually take months for a full implementation.

In a 2006 interview, Phil Emard, President of OpEx, Inc., had this to say about the situation: “Basically, they [pharmaceutical companies] have to stay focused a lot longer than companies in other industries.” He also outlined several important points for a successful implementation in the pharmaceutical industry:

– Keep an eye on what is of value to the customer.

– Begin with a value stream/product flow analysis, and strive for product flow.

– Work toward eliminating errors and reducing lead time.

– Get rid of non-value-added activities.

– Create a sense of urgency.

– Involve everyone.

According to Emard, “Lean principles are very easy to understand, but they’re very hard to implement.” But lean manufacturing consultants with the requisite knowledge and industry experience can ease the transition from an automotive to a pharmaceutical implementation.

Engineering Services For Automotive & Aerospace Industries

Today, industries need to act proactively in order to constantly meet delivery deadlines and customer expectations. In the manufacturing sector two industry domains that need to take control of their engineering divisions, to remain competitive, are the Aerospace industry and the Automotive industry.

Aerospace and Automotive industries are growing significantly in India and other nations. Both the industries have to source components faster and cheaper in order to meet international market standards as well as the expanding domestic market. This is one of the prime reasons for the rapid growth of engineering services sector in India and across the globe.

Both the industries require high-end and sophisticated machinery like 3/4/5 axis milling and turning machines for metal cutting, SPMs (Special Purpose Machines), EDM (Electro discharge machining), Wire cutting/Laser cutting/Waterjet cutting machines, Spark erosion machining, Chemical etching machines, Bending & Forming machines, etc. So, there is a constantly increasing demand for their products in India.

Engineering services are also mushrooming in different cities to cater to this growing demand in aerospace and automotive verticals. Over time industry leaders have realized that getting engaged with the right Engineering Services Outsourcing (ESO) company adds greater value in helping them sustain and improve their cost structures.

In India, there are leading engineering services outsourcing companies that aid industries to leverage the cost advantage and engineering resource availability in low cost and high cost areas. These service companies offer a framework for engineering that leverages labor arbitrage and time zone differences to develop products fast, better and cheaper.

Outsourced engineering services are able to work on high end projects as well as export controlled / ITAR projects for all geographical locations. These companies provide global engineering services using CAD/CAM/CAE tools and help companies to identify their core and non-core engineering processes within their company and move non-core engineering processes and work packages to Indian locations for offshore execution.

The Special Economic Zone that is set up in various cities in India caters to aerospace and automotive industries to not only provide reliable offshore engineering processes, but also a high level of domain knowledge in the machine tool area (which is a highly critical component in product development).

SEZs provide services ranging from concept design through product re-design, drafting, detailing and modelling, engineering analysis and simulation, verification and validation, application engineering, machine layout detailing, design of tools and gauges, fixture designs, process planning, CNC programming, cost excellence programs, cycle time estimation, VA/VE, off-field troubleshooting, HMI-MMI controls, manufacturing and vendor management.

Collaboration with a reliable engineering services division can surely enhance productivity and timely deliveries in both the domains. Companies can also enjoy high cuts in engineering and manufacturing costs.

Benefits of Automotive Service Reminders

The value of having automotive service reminder cannot be ignored. It is a process that is beneficial for the automotive repair business that is cost effective and efficient as well. If you are looking into using the internet as a means of marketing to your prospective clients, then having an auto service reminder is a must. There are a lot of benefits you can get from it.

Having constant communication with your clients is beneficial because your clients feel taken cared of this way. They feel that you are taking time from your busy schedule to check up with them and inform them of upcoming services from your auto repair and maintenance shop. It also serves as recall so your business will retain in your client’s mind even if they do not yet need your service.

If you want to promote customer loyalty, reduce your costs and generate more sales, the auto service reminder is the way to go. You should take the time to make your customer feels special by being able to remind them of your services and contact them even just through email. This way they will surely come back to your business.

With an automotive service reminder system, you do not have to call each of your customers to remind them of their vehicle maintenance schedule. This will reduce the cost of your phone bills. You do not even have to assign a person to do it; you can just outsource this service in order to cut back more on your expenses. The more informed your clients are the more sales you can generate.

In today’s more advanced world, people spend longer time online than they do talking on the phone, They would rather do voice chat or video chat than have long conversation on their mobile phones in order to cut back on phone bills. You can use this information to your advantage by getting automotive service reminder.

Check out various automotive service reviews regarding the service reminder system you are about to purchase from. Make sure you only get this service from a reputable company to ensure the effectiveness of the system. Search for it online in order to save you time and money.